null
 Loading... Please wait...

Diaform Diamond Chisel Tool (LONG ) - 40° inc x 0.25mm (0.010") radius.

£146.36 (inc VAT) £121.97 (exc VAT)
SKU:
DIA52
Quantity:

Product Description

Diaform Diamond Chisel Tool - 40° inc x 0.25mm (0.010") radius. 9.52mm (3/8") x 46mm shank.

  • Chisel tool using a quality 0.35ct diamond which is relappable.
  • Contact us for our relapping services.
Results of Neglect - you may recognise these signs.
  • Chatter or gouge marks - Diamond broken or chipped.- Diamond lines on work - Increased diamond wear or broken diamond.
  • Chatter marks on work - Diamond is dull and is crushing rather than dressing the wheel.
  • Reduced diamond life due to burning - poor flow of coolant on diamond whilst dressing.
Tips - Maintaining your Diamond Dressing Tools
  • A dull diamond tends to crush the grains into the bond of abrasive wheels and crack them without giving a clean break.
  • Grains of wheels that have been crushed in this manner will give the effect of wheel loading - cracked grains will also come out whilst grinding and produce scratch marks in work.
  • Some precautions when setting up a diamond tool
  • Be sure diamond holder is securely held with minimum overhang.
  • Be sure diamond is not cracked, burned or flatted.
  • Be sure, whilst dressing, the diamond is not subjected to excessive shocks or bumps.
  • For best grinding finishes be sure diamond cutting angle is not too sharp.
  • Be sure, whilst dressing, the contact point of the diamond receives plenty of coolant. 
  • Whilst dressing, diamond cuts should not exceed 0.001" per pass.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Click the button below to add the Diaform Diamond Chisel Tool (LONG ) - 40° inc x 0.25mm (0.010") radius. to your wish list.